Procedure to programm INFECTUS2 A3P125 to support ALL WII DMS > D2E 6 wires

1- Install INFECTUS2 PROGRAMMER software version 3.9.9.0 (http://www.infectus.biz/downloads/InfectusProgrammer-3.9.9.0.zip) 
2- Select menu "TOOLS> OPEN INFECTUS"
3- Select PROGRAM button
4- Choose the "wasabus1.7_a3p125.dat" file
5- When programming is done DISCONNECT and RECONNECT INFECTUS2 from USB 
6- Go to menu FLASH COMMANDS and select ERASE (if the menu is not selectable possible issues are: 1-bad actel programming, try again from step3 2- reconnect INFECTUS to USB
7- Select WRITE from the menu and load the file "Wasabus-FW 1.7.bin"
8- Write the BANK0

To setup the REGION pls. see the UPDATED DIAGRAM in this ZIP

Finish.


