# Vice messages
# (English)


# Version info
ViceDate:5 Mar 2007


# Window titles
TitSavebox:Save as
TitInfobox:About VICE
TitDrives:Disk drives
TitTape:Tape
TitDevices:Misc devices
TitSound:Sound
TitSystem:System
TitVideo:Video
TitPet:PET settings
TitVic:VIC20 settings
TitCBM2:CBM2 settings
TitC128:C128 settings
TitJoy:Joysticks
TitSnap:Snapshot
TitJam:CPU Jam Error
TitCrtImg:Create Disc Image
TitLicense:Vice License
TitWarrant:Vice Warranty
TitContrib:Vice Contributors
TitVSid:VSid Player


####################
# Window labels
####################

SysSystem:System
SysRsrc:Resources
SysChargen:CharGen
SysKernal:Kernal
SysBasic:Basic
SysREU:REU
SysIEEE:IEEE488
SysEmuID:EmuID
SysTraps:No Traps
SysAPause:Auto Pause
SysTimings:Timings
SysPollT:Poll cs
SysSpeedT:Speed cs
SysSoundT:Sound cs
SysSpeed:Speed
SysWarp:Warp Mode
SysSprites:Sprites
SysSprColl:Sprite collisions
SysBckColl:Background collisions
SysRomAct:ROM Set
SysKbd:Kbd
SysSpLmt:Speed Lmt
SysMouse:Enable Mouse

VidVideo:Video
VidBPlot:Use BPlot
VidSetPal:Set Palette
VidFullScN:Screen norm
VidFullScP:Screen PAL
VidFullScD:Screen double
VidMaxSkip:Max fskip
VidRfrsh:Refresh
VidPalette:Palette
VidExtPal:External Pal
VidPALEmu:PAL Emulation
VidPALDep:Depth
VidPALDbl:Double size
VidColSat:Saturation
VidContrst:Contrast
VidBright:Brightness
VidGamma:Gamma
VidDelLoop:Delay Loop
VidLineShd:Line Shade
VidPMode:PAL Mode
VidCache:Video cache

PaneReset:Reset
PaneZoom1:1 x
PaneZoom2:2 x
PanePause:Pause
PaneResume:Resume

InfoName:Name
InfoPurp:Purpose
InfoAuth:Authors
InfoPort:RO Port
InfoVers:Version

DriveDrvs:Drives
DriveTrue:True Drive Emulation
DriveTrOn:Enable
DriveTrP8:Parallel Cable 8
DriveTrP9:Parallel Cable 9
DriveTrP10:Parallel Cable 10
DriveTrP11:Parallel Cable 11
DriveDet:Detach

TapeTape:Tape
TapeDet:Detach
TapeCPUReset:Reset Datasette with CPU
TapeCtr:Counter
TapeStop:Stop
TapeRec:Rec
TapeReset:Reset

DevRS232:RS232
DevPrint:Printer
DevACIAIrq:ACIA Irq
DevACIADE:ACIA DE
DevACIAD6:ACIA D6
DevACIAD7:ACIA D7
DevUsrPrt:UsrPrt
DevSerial:Serial
DevIEC:IEC

SndSound:Sound
SndEnable:Enable
SndFilt:SID Filt
SndResPass:Pass
SndVolume:Volume
SndSID:SID
Snd16Bit:16bit
SndStereo:Stereo SID
Snd2Addr:2nd SID Address

PetPet:PET
PetKbd:Kbd
PetCRT:CRT
PetRAM9:RAM $9000
PetRAMA:RAM $A000
PetPin:DiagPin
PetSuper:SuperPET

VicVic:VIC20
VicMem:MemExp

CBM2Cbm:CBM2
CBM2Kbd:Kbd
CBM2RAM:RAM

C128vdc:VDC
C128pal:Palette
C128size:64kB
C1288040:40/80 Key
C128z80bios:Z80BiosName
C128dblsze:VDC double size
C128dblscn:VDC double scan

JoyJoy:Joysticks
JoyKey1:Keyset 1
JoyKey2:Keyset 2
JoyKeyU:Up
JoyKeyD:Down
JoyKeyL:Left
JoyKeyR:Right
JoyKeyF:Fire

SnapROM:ROMs
SnapDisk:Disks

JamReset:Reset
JamResetH:Hard Reset
JamMon:Monitor
JamDebug:Debug

VSidName:Name
VSidAuth:Author
VSidCopy:Copyright
VSidTotal:Number
VSidSpeed:Speed
VSidDflt:Default
VSidTime:Time
VSidStop:Stop
VSidPlay:Play
VSidPause:Pause
VSidResume:Cont



####################
# Menus
####################

# Configure
MenConfTit:Configure
MenConfDrv:Drives...
MenConfTap:Tape...
MenConfDev:Devices...
MenConfSnd:Sound...
MenConfSys:System...
MenConfVid:Video...
MenConfJoy:Joysticks...
MenConfMch:Machine...
MenConfSav:Save
MenConfRel:Reload

# Datasette
MenDStTit:Datasette
MenDStStp:Stop
MenDStStr:Start
MenDStFwd:Forward
MenDStRwd:Rewind
MenDStRec:Record
MenDStRst:Reset

# Fliplist
MenFlpTit:Fliplist
MenFlpAtt:Add this
MenFlpDet:Remove this
MenFlpNxt:Next    PgUp
MenFlpPrv:Prev  PgDown
MenFlpClr:Clear
MenFlpSav:Save
MenFlpImg:Images

# Icon Bar
MenIBInfo:Info
MenIBConf:Configure
MenIBLicns:License...
MenIBWrnty:Warranty...
MenIBCntrb:Contrib...
MenIBLog:Log window...
MenIBCreat:Create Disc...
MenIBFull:Fullscreen
MenIBQuit:Quit

# Emu window
MenEmuConf:Configure
MenEmuFlip:Fliplist
MenEmuSnap:Snapshot    ^F9
MenEmuScr:Screenshot  Prnt
MenEmuFrz:Freeze
MenEmuPane:Show Pane    F9
MenEmuActv:MovePane    F10
MenEmuTrue:True Drive num/
MenEmuDSt:Datasette
MenEmuSnd:Sound        F5
MenEmuMon:Monitor      F6

# Configure printer
MenPrtTit:PrintDev
MenPrtFile:File
MenPrtPar:Parallel
MenPrtSer:Serial

# Configure UserDev
MenUsrTit:UserDev
MenUsrFile:File
MenUsrPar:Parallel
MenUsrSer:Serial

# Configure sample rate
MenSampTit:SampleRate
MenSamp8:8000Hz
MenSamp11:11025Hz
MenSamp22:22050Hz
MenSamp44:44100Hz
MenSamp48:48000Hz

# Sound Dev
MenSndTit:SoundDev
MenSndVidc:VIDC
MenSndVidcS:VIDC Sync
MenSndDmy:Dummy
MenSndFS:FS
MenSndWav:WAV
MenSndSpd:Speed
MenSndDmp:Dump

# Sound oversample
MenOverTit:Oversample
MenOver1:1x
MenOver2:2x
MenOver4:4x
MenOver8:8x

# Sound buffer size
MenSBfTit:BufferSize
MenSBf2:2cs
MenSBf4:4cs
MenSBf6:6cs
MenSBf8:8cs
MenSBf10:10cs
MenSBf20:20cs
MenSBf35:35cs
MenSBf50:50cs
MenSBf100:100cs

# Sound speed adjustment
MenSAdjTit:Speed Adjustment
MenSAdjFlx:Flexible
MenSAdjAdj:Adjusting
MenSAdjXct:Exact

# SID engine
MenSidEngT:SID Engine
MenSidEngF:Fast
MenSidEngR:reSID
MenSidEngC:Catweasel

# ReSID sampling method
MenRSmpTit:reSID Sampling
MenRSmpFst:Fast
MenRSmpInt:Interpolate
MenRSmpRes:Resample

# True drive menus
MenExt8Tit:Extend Image 8
MenExt9Tit:Extend Image 9
MenExt10Tit:Extend Image 10
MenExt11Tit:Extend Image 11
MenExtNvr:Never
MenExtAsk:Ask
MenExtXss:Access
MenIdl8Tit:Idle Method 8
MenIdl9Tit:Idle Method 9
MenIdl10Tit:Idle Method 10
MenIdl11Tit:Idle Method 11
MenIdlNoT:No traps
MenIdlSkp:Skip cycles
MenIdlTrp:Trap idle
MenDtp8Tit:Drive Type 8
MenDtp9Tit:Drive Type 9
MenDtp10Tit:Drive Type 10
MenDtp11Tit:Drive Type 11
MenDtpNone:None
MenDtp1541:1541
MenDtp15412:1541II
MenDtp1551:1551
MenDtp1570:1570
MenDtp1571:1571
MenDtp1571C:1571CR
MenDtp1581:1581
MenDtp2031:2031
MenDtp2040:2040
MenDtp3040:3040
MenDtp4040:4040
MenDtp1001:1001
MenDtp8050:8050
MenDtp8250:8250
MenSncTit:SyncFactor
MenSncPAL:PAL
MenSncNTSC:NTSC

# General drive menus
MenDskTit:Disk Image
MenDskDet:Detach
MenFSTit:FS Options
MenFSCP00:Convert P00
MenFSSP00:Save as P00
MenFSHide:Hide CBM
MenTypTit:Drive Type
MenTypDsk:Disk
MenTypFS:FS

# RsUsrDev
MenRsUTit:RsUsrDev
MenRsUFile:File
MenRsUPar:Parallel
MenRsUSer:Serial

# AciaDev
MenAciaTit:AciaDev
MenAciaFile:File
MenAciaPar:Parallel
MenAciaSer:Serial

# SID model
MenSidTit:SidModel
MenSid6581:6581
MenSid8500:8580

# Speed limit
MenSLmTit:SpeedLimit
MenSLm200:200%
MenSLm100:100%
MenSLm50:50%
MenSLm20:20%
MenSLm10:10%
MenSLm0:None

# Refresh rate
MenRefTit:Refresh
MenRefAuto:Auto
MenRef1:1/1
MenRef2:1/2
MenRef3:1/3
MenRef4:1/4
MenRef5:1/5
MenRef6:1/6
MenRef7:1/7
MenRef8:1/8
MenRef9:1/9
MenRef10:1/10

# Serial rate
MenSerTit:Serial

# Cartridge
MenCrtTit:Cartridge
MenCrtNone:None
MenCrtSS5:Super Snapshot 5
MenCrtIEEE:IEEE488
MenCrtIDE:IDE
MenCrtUlt:Ultimax
MenCrtRetr:Retro Replay
MenCrtSSn:Super Snapshot
MenCrtG8:Generic 8k
MenCrtG16:Generic 16k
MenCrtCRT:CRT
MenCrtAct:Action Replay
MenCrtKCS:KCS Power
MenCrtFin3:Final III
MenCrtSim:Simons Basic
MenCrtOcn:Ocean
MenCrtExpt:Expert
MenCrtFun:Funplay
MenCrtSGm:Super Games
MenCrtAtom:Atomic Power
MenCrtEpyx:Epyx Fastload
MenCrtWest:Westermann
MenCrtRex:Rex
MenCrtFin1:Finale I
MenCrtMagc:Magic Formel
MenCrtGS:GS
MenCrtWrp:Warpspeed
MenCrtDin:Dinamic
MenCrtZax:Zaxxon

# PAL Emu depths
MenPALDepT:PAL Emu Depth
MenPALDOff:Off
MenPALDAut:Auto
MenPALD8:8bpp
MenPALD16:16bpp
MenPALD32:32bpp

# PAL modes
MenPModeT:PAL Mode
MenPMFast:Fast
MenPMTrue:True

# 2nd SID Address
MenSid2ATit:2nd SID Address

# PET memory
MenPMyTit:Memory
MenPMy4:4kB
MenPMy8:8kB
MenPMy16:16kB
MenPMy32:32kB
MenPMy96:96kB
MenPMy128:128kB

# PET IO size
MenPIOTit:IO Size
MenPIO2:2kB
MenPIO256:256kB

# PET Video
MenPVdTit:Video
MenPVdAuto:Auto
MenPVd40:40 Columns
MenPVd80:80 Columns

# PET Model
MenPMdTit:Model
MenPMd201:2001
MenPMd308:3008
MenPMd316:3016
MenPMd332:3032
MenPMd332B:3032B
MenPMd416:4016
MenPMd432:4032
MenPMd432B:4032B
MenPMd832:8032
MenPMd896:8096
MenPMd8296:8296
MenPMdSup:SuperPET

# VIC RAM expansion
MenVRmTit:RamExp
MenVRm04:$0400-$0FFF
MenVRm20:$2000-$3FFF
MenVRm40:$4000-$5FFF
MenVRm60:$6000-$7FFF
MenVRmA0:$A000-$BFFF

# VIC ROM Cartridge
MenVCtTit:RomCartridge
MenVCt2:$2000
MenVCt6:$6000
MenVCtA:$A000
MenVCtB:$B000

# DOS name
MenDOSTit:DOS Name
MenDOS1541:1541
MenDOS15412:1541-II
MenDOS1551:1551
MenDOS1570:1570
MenDOS1571:1571
MenDOS1571C:1571CR
MenDOS1581:1581
MenDOS2031:2031
MenDOS2040:2040
MenDOS3040:3040
MenDOS4040:4040
MenDOS1001:1001
MenDOS8050:8050
MenDOS8250:8250

# CBM2 model line
MenC2MlTit:Model Line
MenC2Ml75:7x0 (50Hz)
MenC2Ml66:6x0 (60Hz)
MenC2Ml65:6x0 (50Hz)

# CBM2 memory
MenC2MyTit:Memory
MenC2My128:128kB
MenC2My256:256kB
MenC2My512:512kB
MenC2My1M:1024kB

# CBM2 model
MenC2MdTit:Model
MenC2Md51:CBM 510
MenC2Md61:CBM 610
MenC2Md62:CBM 620
MenC2Md62P:CBM 620+
MenC2Md71:CBM 710
MenC2Md72:CBM 720
MenC2Md72P:CBM 720+

# CBM2 RAM
MenC2RTit:RAM
MenC2R08:Ram08
MenC2R1:Ram1
MenC2R2:Ram2
MenC2R4:Ram4
MenC2R6:Ram6
MenC2RC:RamC

# CBM2 Cartridge
MenC2CTit:Cartridge
MenC2C1:$1000
MenC2C2:$2000
MenC2C4:$4000
MenC2C6:$6000

# Joysticks
MenJoyTit1:JoyPort1
MenJoyTit2:JoyPort2
MenJoyNone:None
MenJoyKey1:Keyset 1
MenJoyKey2:Keyset 2
MenJoyJoy1:Joystick 1
MenJoyJoy2:Joystick 2

# ROM sets
MenRSTit:ROM sets
MenRSDef:Default

# Fliplist images
MenFlImTit:Disk Images
MenFlImDet:Detach

MenRANT:New ROMSet
MenRActT:ROMSet Cmd
MenRActCrt:Create
MenRActDel:Delete
MenRActSav:Save
MenRActDmp:Dump
MenRActClr:Clear
MenRActRst:Restore

# Keyboard
MenKbdT:Keyboard map
MenKbdSav:Save
MenKbdLd:Load default

# Video cache
MenVCaT:Video Cache
MenVCaVIC2:VICII
MenVCaVIC:VIC
MenVCaVDC:VDC
MenVCaCrt:Crtc
MenVCaTED:TED

# Mouse
MenMPrtT:Mouse Port



####################
# Misc
####################

OK:OK
Cancel:Cancel
TextFile:File
PaneFmtSpeed:%d%%
PaneFmtFps:%d fps


####################
# Messages
####################

MsgPurpFmt:Emulate Commodore %s
MsgMachDown:Machine down.

####################
# Dialogues
####################

DlgExtendImage:Do you want to extend the disk image to 40 tracks?

####################
# Error messages
####################

# Internal
# Errors
ErrScreenMode:Can't handle modes with eigen_x > eigen_y
ErrCreateWin:Can't create window
ErrFileNoPath:Filename is not a path
ErrMemory:Not enough memory left for this operation
ErrRAMTrans:RAM transfer failed
ErrFileFmt:Error opening file <%s>
# Symbols
DefSBTitle:SaveBox
DefSBButOK:OK
DefTWMTit:Text Window
DefTWMSav:Save
DefTWMSlct:Selection
DefTWMSall:Select all
DefTWSTit:Selection
DefTWSSav:Save
DefTWSClr:Clear
DefTWSDel:Delete
DefTWSCpy:Copy
DefTWSMov:Move

# ui
ErrTemplateFmt:Error loading template <%s>
ErrSpriteFmt:Couldn't find custom sprites <%s>
ErrIconFmt:Couldn't find icon sprite <%s>
ErrTempFileFmt:Couldn't open templates file <%s>
ErrSaveFmt:Couldn't save data to <%s>
ErrLoadFmt:Other application couldn't load <%s>
ErrSpriteMem:Unable to claim memory for sprite pool!
ErrSnapRead:Error reading snapshot file.
ErrSnapWrite:Error writing snapshot file.
ErrFullScreen:Can't switch to fullscreen mode.



####################
# Help messages
####################

# Emulator pane
HelpPaneWindow:Emulator pane for various tools.
HelpPaneDrives:Drives. Drag a disk image or directory to this icon to attach it.|MHold down shift before releasing the drag to display its contents.|MDrag a fliplist file here to activate it.
HelpPaneDrv0:Click MENU for fliplist.
HelpPaneReset:Reset the emulated machine.|MSELECT for soft reset, ADJUST for hard reset.
HelpPanePause:Pause or resume the emulation.
HelpPaneSpeed:Emulation speed. Click to toggle between percent and FPS.
HelpPaneToggle:Toggle emulator window size between 1x and 2x.
HelpPaneTrkSec:In true drive mode, display current track.|MClick to toggle between drive 8 and 9.

# Emulator window(s)
HelpEmuWindow:Emulator window.|MDrag snapshots here to load them.|MDrag PRG files here to autostart them; in Vice64, hold down shift to only load them.

# Info window
HelpInfoWindow:VICE|MFor general documentation see the doc directory.|MFor RISC OS specific documentation read !ViceRsrc.!Help.

# Image contents window
HelpImageContents:Contents of the image file.|MDouble click on a file to load and autostart it (or on the title to autostart the first file).|MDrag an image file here to display its contents.

# Create disk image window
HelpCreateWindow:Create a disk image.
HelpCreateType:Click to select the image type.
HelpCreateTypeT:The image type to use.
HelpCreateName:The name of the disk stored within the image in the format NAME,ID.
HelpCreateSprite:Drag this sprite to where you want to save the disk image.
HelpCreateOK:Click OK to save the new disk image with this file name.
HelpCreateFile:The file name to store the disk image under.

# VSID player window
HelpVSidWindow:VSID Player.
HelpVSidTotal:The total number of tunes in this PSID file.
HelpVSidTune:The number of the current tune.
HelpVSidNext:Click SELECT for the next tune, ADJUST for the previous one.
HelpVSidPrev:Click SELECT for the previous tune, ADJUST for the next one.
HelpVSidStop:Click to stop playback and set the player in idle mode.
HelpVSidDefault:The default tune that's played first when the PSID file is loaded.
HelpVSidTime:The total playing time of the current tune in seconds.
HelpVSidPause:Click to pause playback and set the player in idle mode.

# Monitor window
HelpMonitorWindow:VICE Monitor|MEnter "help" for a command overview. To exit the monitor, enter "x" or close the window. See the general Vice documentation for details.

# Drive configuration window
HelpConfDrive:Disk drive configurations.
HelpConfDrvType:Click to choose the disk type. DISK is for a disk image (D64 etc), FS is for the native file system.
HelpConfDrvFile:The name of the disk image if the drive type is DISK, a directory for drive type FS. Drag either type to this icon to set it (and the drive type automatically).
HelpConfDrvRO:Attach disk images read only if ticked.
HelpConfDrvTrue:Enable true drive emulation. This is necessary for things like fastloaders. If a game doesn't work, try again with true drive emulation enabled.
HelpConfDrvPar:Simulate parallel cable as used by e.g. SpeedDOS.
HelpConfDrvExt:Click to choose a disk image extend method (in case of writing to disk images and running out of space).
HelpConfDrvExtT:The current disk image extend method.
HelpConfDrvIdle:Click to choose a drive idle method. NO TRAPS is the slowest but most accurate method.
HelpConfDrvIdleT:The current idle method for this drive.
HelpConfDrvTT:Click to choose the type of this drive. 1541 is the traditional drive for the C64, 1571 is the default for the C128.
HelpConfDrvTTT:The current type of this drive.

# Tape configuration window
HelpConfTape:Tape configurations.|MT64 are simple tape image files, TAP are basically sampled original tapes.
HelpConfTapeFile:File name of the tape image file (usually T64 or TAP).|MDrag a tape image file here to activate it.|MHold down shift while dragging a tape image file here to display its contents.
HelpConfTapeDet:Detach the tape image.
HelpConfTapeRst:Reset the datassette (TAP mode).
HelpConfTapeCtr:The current tape counter (TAP mode).
HelpConfTapeStop:Stop the tape (TAP mode).
HelpConfTapeRwd:Rewind the tape (TAP mode).
HelpConfTapePlay:Start playing the tape (TAP mode).
HelpConfTapeFwd:Fast forward the tape (TAP mode).
HelpConfTapeRec:Start recording on the tape (TAP mode).

# Misc devices configuration window
HelpConfDevice:Misc devices configurations.
HelpConfDeviceDev:You can choose between parallel and serial port and files.
HelpConfDevACIAIrq:Enable RS232 emulation.
HelpConfDevACIADev:Click to select a destination for ACIA RS232 emulation.
HelpConfDevACIADevT:The currently selected destinaton for ACIA RS232 emulation.
HelpConfDevACIADE:Emulate ACIA6551 at $de**
HelpConfDevACIA67:
HelpConfDevRsUsr:Emulate user-port RS232 interface.
HelpConfDevRsUsrDev:Click to select the destination for user port RS232 emulation.
HelpConfDevRsUsrDevT:The currently selected destination for user port RS232 emulation.
HelpConfDevSerial:Click to choose the baud rate of the serial device.
HelpConfDevSerialT:The currently selected baud rate of the serial device.
HelpConfDevOK:Click to use the filename to the right as destination file for the device.
HelpConfDevPath:The destination file for the device.
HelpConfDevIcon:Drag this icon to a directory to select the destination file for the device using the leaf name to the left.
HelpConfDevPrntOn:Enable IEC (serial) printer emulation.
HelpConfDevPrntDev:Click to select a destination for the serial printer emulation.
HelpConfDevPrntDevT:The currently selected destination for serial printer emulation.
HelpConfDevPrntUsrOn:Enable user port (parallel) printer emulation.
HelpConfDevPrntUsrDev:Click to select the destination for the user port printer emulation.
HelpConfDevPrntUsrDevT:The currently selected destination for the user port printer emulation.

# Sound configuration window
HelpConfSound:Sound configurations.
HelpConfSndOn:Enable sound playback. You should have 100% emulation speed for this.
HelpConfSndRate:Click to choose a sample rate. The higher the rate, the better the quality and the more CPU cost. Typical rates are 22050Hz or 44100Hz (CD quality).
HelpConfSndRateT:The currently selected sound rate.
HelpConfSndDev:Click to choose a sound device. VIDC is asynchronous sound on RISC OS (good for games, bad for music), VIDC Sync is synchronous sound on RISC OS (vice versa). The others write to a file.
HelpConfSndDevT:The currently active sound device.
HelpConfSndOver:Click to choose the oversampling rate. Oversampling operates on a higher sample rate internally and downsamples it to a lower rate for output. Oversampling is expensive and doesn't work with the VIDC device.
HelpConfSndOverT:The currently selected oversampling rate.
HelpConfSndMod:Click to choose the SID model. 6581 is the SID chip in the classic C64, 8580 is the one in the mark II models.
HelpConfSndModT:The currently selected SID model.
HelpConfSndFilter:Enable sound filters. This should always be enabled because most SID music relies (heavily) on filters.
HelpConfSndOK:Click here to use the filename to the right as output for file-based sound devices.
HelpConfSndFile:The filename to use as output for file-based sound devices.
HelpConfSndIcon:Drag this icon to the directory where you want to save the output of file-based sound devices.
HelpConfSndVol:The sound volume. Drag the bar to the left to decrease the volume, drag it to the right to increase it.
HelpConfSndBuff:The sound buffer size. The larger the buffer, the less likely dropouts are, but the longer it takes before you can hear the sound (latency). When listening to music, use a large value, when playing a game use a small one.
HelpConfSndBuffT:The currently selected sound buffer size.
HelpConfSndReSID:Choose the SID engine. Use Dag Lem's ReSID engine for much improved (but somewhat slower) SID emulation. Warning, ReSID doesn't work with the VIDC device, use VIDC Sync instead!
HelpConfSndAdj:Click to choose a speed adjustment method in case the emulation speed differs from 100%.
HelpConfSndAdjT:The currently selected speed adjustment method.
HelpConfSndReSamp:ReSID sampling method|MFast clocks at output sample speed, the other two at cycle frequency.|MInterpolate and Resample are too expensive for real time on current RISC OS hardware.
HelpConfSndReSampT:The currently used ReSID sampling method.
HelpConfSndRePass:The ReSID passband in percent for the resampling method.|MThe larger the value, the more expensive.
HelpConfSnd16Bit:Use 16bit linear sound as available on newer RISC OS machines. If unavailable, 8bit logarithmic will be used automatically.
HelpConfSndStereo:Emulate stereo SIDs.|MNote that you need actual stereo SID programs for this to take any effect.

# System configuration window
HelpConfSystem:System configurations.|MYou can drag keyboard mapping files or romset archives to this window to activate them.
HelpConfSystemPath:If no pathname is given, the file is looked for in the machine's directory in !ViceRsrc.|MYou can drag a file here to activate it.
HelpConfSystemCart:You usually have to reset the computer after changing cartridge settings.
HelpConfSysCharGen:The ROM containing the character bitmaps.
HelpConfSysKernal:The machine's kernal ROM; this contains the operating system core.
HelpConfSysBasic:The machine's BASIC ROM; this contains the BASIC interpreter.
HelpConfSysREU:Use a REU (RAM Expansion Unit).
HelpConfSysIEEE:Use the IEEE488 bus for floppy drives (parallel) without having to use true drive emulation. See the general docs for a list of drives this works with.
HelpConfSysID:Enable the emulation ID extension.
HelpConfSysTraps:Disable kernal traps. Kernal traps are used for high-level emulation of some OS calls, e.g. file loading etc. Disabling kernal traps makes emulation more exact at the expense of speed.
HelpConfSysPlEv:Poll every x centiseconds. This regulates how often Vice yields control to the other WIMP tasks. Small values make the desktop more responsive, but Vice slower.
HelpConfSysSpEv:Update the speedometer every x centiseconds.
HelpConfSysSndEv:Asynchronous sound only: poll sound every x centiseconds, or 0 for default.
HelpConfSysSpdLmt:Click to select the speed limit. 100% means the original machine speed and is usually the right choice, especially when you have sound enabled.
HelpConfSysSpdLmtT:The currently selected speed limit.
HelpConfSysWarpMode:Enable warp mode (disable speed limit, turn off sound, use 1/10 refresh).
HelpConfSysCrtType:Click to select the type of the cartridge (file to the right). Use NONE to detach.
HelpConfSysCrtTypeT:The currently selected cartridge type.
HelpConfSysCrtFile:The filename of the cartridge image. Drag a file here to attach it.
HelpConfSysSScl:Enable sprite-sprite collision detection in hardware.
HelpConfSysSBcl:Enable sprite-background collision detection in hardware.
HelpConfSysDosName:Click and select a drive type to display or modify the name of its DOS ROM to the right.
HelpConfSysDosNameT:The drive type whose ROM file is displayed to the right.
HelpConfSysDosNameF:The filename of the DOS ROM for the drive type shown to the left.
HelpConfSysAutoPs:Select to automatically pause emulation if the main window is closed. Otherwise emulation continues.
HelpConfSysROMSet:Click to select a ROM set (sets of matching ROMs like kernal, basic, dos, ...). All ROM sets are stored in the file romset/vra in the machine's resource directory in !ViceRsrc.
HelpConfSysROMSetT:The currently selected ROM set.
HelpConfSysROMAct:Click to modify the ROM sets. You can CREATE a new one, DELETE or SAVE the current one, DUMP to update the ROM set resource, CLEAR all ROM sets or RESTORE the default ROM set.
HelpConfSysKbd:Click to save the current keyboard mapping file or restore the default one.
HelpConfSysKbdT:The currently selected keyboard mapping file.
HelpConfSysVsync:Click to select the video sync mode; PAL is for emulating a european machine, NTSC for a US version.
HelpConfSysVsyncT:The currently selected video sync mode.

# Video configuration window
HelpConfVideo:Video configurations.
HelpConfVidVCache:Enable video cache. This means that only those parts of the screen are redrawn which actually changed. Depending on how much changed, the video cache can speed things up or slow them down.
HelpConfVidRefresh:Click to select the refresh frequency. 1/x means that only every x-th emulated frame is actually displayed. High values of x make emulation faster but less smooth.
HelpConfVidRefreshT:The currently selected refresh frequency.
HelpConfVidMaxSkip:The maximum number of frames that may be skipped in auto refresh mode.|MThe higher the value, the faster the emulation runs and the jerkier the display gets.
HelpConfVidFullScrFormat:Format num:resx,resy,ldbpp. num is the mode number (pre-RO3.5), the others are used on RO3.5 or newer.
HelpConfVidFullScrNorm:String describing the screen mode for normal full screen mode.
HelpConfVidFullScrPAL:String describing the screen mode for PAL emulation full screen mode.
HelpConfVidFullScrDbl:String describing the screen mode for double size PAL full screen mode.
HelpConfVidSetPal:When switching to full screen mode, also redefine the palette so there are exact matches for the emulated machine's colours.
HelpConfVidUseBPlot:Use the BPlot module when possible.|MViewFinder users should always have this option OFF.
HelpConfVidPal:The palette which maps machine colours to RGB colours. Ignored unless external palettes are activated.
HelpConfVidExtPal:Enable the external palette, otherwise one will be calculated internally.
HelpConfVidPALDepth:Click here to select the colour depth for PAL emulation. Auto selects the depth of the screen mode.
HelpConfVidPALDepthT:The currently selected colour depth for PAL emulation.
HelpConfVidPALDouble:Enable double size PAL emulation (necessary for real PAL emulation, but very expensive).
HelpConfVidColourSat:PAL emulation: colour saturation.
HelpConfVidContrast:PAL emulation: contrast.
HelpConfVidBrightness:PAL emulation: brightness.
HelpConfVidGamma:PAL emulation: gamma factor.
HelpConfVidLineShade:PAL emulation: scal line shade.
HelpConfVidPalMode:Click here to select the PAL emulation mode.
HelpConfVidPalModeT:PAL emulation: currently selected mode.

# Joystick configuration window
HelpConfJoystick:Joystick configurations.|MYou should pause the emulation if you want to change the keys.
HelpConfJoyPort:Click here to select a mapping for this joystick port of the emulated machine. You can map it to one of two joystick ports of your RISC OS machine or one of two different keyboard mappings.
HelpConfJoyPortT:The currently selected mapping for this joystick port of the emulated machine.
HelpConfJoyKeymap:Press the key you want to bind this joystick command to. Low-level keys like SHIFT and CTRL are allowed too.

# PET configuration window
HelpConfPET:PET specific configurations.
HelpConfPETMem:Click to select how much main memory you want in your PET.
HelpConfPETMemT:The amount of main memory currently active in your PET.
HelpConfPETIO:Click to select the size of your PET's IO area.
HelpConfPETIOT:The currently selected IO area size of your PET.
HelpConfPETVideo:Click to select the width of your PET's video system.
HelpConfPETVideoT:The currently selected width of your PET's video system.
HelpConfPETModel:Click to select your PET's model; this will automatically set memory, IO size, video width etc.
HelpConfPETModelT:The currently selected PET model.
HelpConfPETKbd:The currently active keyboard mapping. You can change it in the system config window.
HelpConfPETCrt:Enable CRTC 6545 emulation (available in models from 40xx and above).
HelpConfPETRAM9:Enable the 8296 controller to map RAM into the address range $9000-$9fff.
HelpConfPETRAMA:Enable the 8296 controller to map RAM into the address range $a000-$afff.
HelpConfPETDiag:Set the diagnostic pin on the PET userport. When the diagnostic pin is enabled, the kernal jumps to the monitor rather than the BASIC prompt.
HelpConfPETSuper:Enable SuperPET IO and disable 8x96 memory mappings.

# VIC configuration window
HelpConfVIC:VIC20 specific configurations.
HelpConfVICCart:Click and select a cartridge type to display or modify the name of its ROM image to the right.
HelpConfVICCartT:The cartridge type whose ROM filename is displayed to the right.
HelpConfVICCartF:The cartridge ROM file for the cartridge type displayed to the left. Drag a ROM file here to activate it.
HelpConfVICMem:Click and select the ROM blocks you want to activate. See the generic Vice docs for the mapping of ROM blocks to address ranges.

# CBM2 configuration window
HelpConfCBM2:CBM2 specific configurations.
HelpConfCBMLine:Click to select the CBM-II model line. This also changes the settings for memory and model.
HelpConfCBMLineT:The currently selected CBM-II model line.
HelpConfCBMMem:Click to select how much main memory you want in your CBM-II.
HelpConfCBMMemT:The currently available main memory in your CBM-II.
HelpConfCBMModel:Click to select the CBM-II model.
HelpConfCBMModelT:The currently selected CBM-II model.
HelpConfCBMRAM:Click to select which expansion ROM areas RAM can be mapped to. See the generic Vice docs for a mapping of expansion ROM areas to address ranges.
HelpConfCBMKbd:The currently selected keyboard mapping. You can change it in the system configuration window.
HelpConfCBMCart:Click and select a cartridge type to display or modify the name of its ROM image to the right.
HelpConfCBMCartT:The cartridge type whose ROM filename is displayed to the right.
HelpConfCBMCartF:The cartridge ROM filename for the cartridge type displayed to the left. Drag a cartridge file here to activate it.

# C128 configuration window
HelpConfC128:C128 specific configurations.|MThe VDC is the C128's second video chip which offers 80 column display, the primary chip is the VIC-II, same as in the C64. The C128 also had a Z80 as second processor for CP/M mode.
HelpConfC128Path:If no pathname is given, the file is looked for in the machine's directory in !ViceRsrc.|MYou can drag a file here to activate it.
HelpConf128Pal:The currently active VDC palette.
HelpConf128Size:Enable 64kB video RAM size of the VDC.
HelpConf1284080:Emulates the 40/80 key of a real C128. If ticked, the machine will boot into 40 column display, otherwise 80 columns.
HelpConf128z80bios:The currently active Z80 BIOS filename.
HelpConf128dsize:Enable VDC double scan mode to double the vertical size and correct the aspect ratio (requires more memory); the number of vertical lines drawn remains unchanged.
HelpConf128dscan:In addition to doubling the vertical size of the VDC display, also draw every visible vertical line to achieve a solid display without rasterization effects.
