Filetrip Logo

DualBoot Installer GUI 1.0

Steps to using this GUI

1. If using Windows 7 or Vista, boot your PC with Driver Signing off(While booting press F8 and select the driver signing option)
2. Enter USB mode by connecting the Dingoo to the PC, then hold B and use the reset button
3. Install the driver located in the zip file
4. Use the GUI and press step 1(Make sure you know your LCD model, ILI9325 or ILI9331, and then you should see Dingux on your screen
5. Press step 2 and follow on screen instructions

Change log (1.0):
comments powered by Disqus