Filetrip Logo


M3i Zero GMP-Z003 Updater Plus 450HW Update (2013-1-14) 1.0



This is the updated patch for M3i zero to support 3ds v4.5.0-10 and DSi V1.45.

This updated software package supports only the M3i Zero card (GMP-Z003 model), the code is printed on the top right of the label of the card.
*If you used this package upgrade, you also need to use the "M3i Zero Core data file V4.5.0" to upgrade again to compatible with 3DS 4.5.0-10x firmware.


Procedures:

1. i) Copy the “M3GUpdaterPlus_450HW.nds” onto the microSD card.
ii) Copy the "system" file onto the microSD card or install the "M3SAKURA" system
(For the detail of installing the system or "M3SAKURA", please read the corresponding instruction.)
2. Insert that microSD card into the M3i Zero card.
3. Insert M3i Zero card into one of the following console (NDS, NDS Lite or NDSi NDSi(XL))
4. Power on the console and the M3 software should run up. Select the "M3GUpdaterPlus_450HW.nds" file then press [A] to launch it.
5. Just follow the instruction on the screen or press [start] twice to start the updated process.
6. The "Updating success" message will be displayed on the screen if the updated process is success.
7. After the updated process is finished, you may take out the M3i Zero, and use the Power Supply Cable to upgrade "Core data file V4.5.0".

http://www.gamekool.com/buy-m3i-zero-sakura-for-dsi-3ds-now-p-254.html

Change log (1.0):
comments powered by Disqus