Q:How to upgrade the firmware of DSLinker to 1.23A?
Important: This upgrade operation need to format DSLinker, please backup your game and save first. 
1.Insert DSLinker Writer into slot 2 and insert DSLinker into slo 1.
2.Use USB cable connect to PC USB port directly. (Please do not use extension USB cable)
3.Hold the "up" directionnal button and turn on power.
4.still holding "up", press "L+R+A+B", will enter upgrade mode, a red color message will appear.
5.Double click "NAND_8G_256K" (NAND_16G_256K for 16G DSLinker) to run upgrade program. If there some "found a badblock" appear, that mean it doesn't work, please change a PC USB port or USB cable and try again.
6.Format DSLinker, it will work again.

Q: How to format DSLinker? (New firmware do not need "flashformat" program to format)
1. Insert DSLinker Writer into slot 2 and insert DSLinker into slo 1.
2. Hold the "down" directionnal button and turn on power
3. still holding "down", press "L+R+A+B", will enter format program mode and will do low level format and high level format together.
4. Now, PC can recognise DSLinker as a USB disk.
5. Copy the "DSYSTEM" folder into DSLinker root.

Q: What's new of this firmware?
1.Support Moonshell 1.6 Movie with fluency (Please download Moonshell for DSLinker from soft page).
2.Optimized FAT file system.
3.Open FAT I/O Source, easy for programmer make homwbrew.
4.Open USB Plugin Source, easy for programmer make USB application.
5.Support PDA software DSOrganize(Please download DSOrgainze for DSLinker from soft page).


www.dslinker.com