iEVO Bootstrap v1.1 for USA
===========================

CycloDS iEvolution official website: http://www.cyclopsds.com

How to use
----------

1. Obtain the required ROM files, as listed below
2. Extract the contents of this archive to a directory on your PC and
   load the "iEVOBootTool" program
3. Select the source firmware file, which is the .bin file included
   along with this archive. Also select the DSLite and DSi ROM files,
   as specified below
4. Click "Process". Providing there were no errors (such as corrupt
   ROM files), a file named "BOOTUPDT.EVO" will be placed in the same
   directory as the iEVOBootTool program
5. Copy BOOTUPDT.EVO to the root directory of a MicroSD card
6. Ensure that iEvolution does not have any MicroSD inserted, and then
   insert the cartridge into the updater dongle
7. Insert the updater dongle into a USB port on your PC and wait for 
   the red LED to light up
8. Once the red LED is lit up, while keeping iEvolution plugged into 
   the PC, insert the MicroSD card containing the BOOTUPDT.EVO file
9. The red LED should switch off after a few seconds, which indicates
   that the iEvolution bootstrap update is in progress. If the LED does not
   switch off, or if it flashes on and off, then there is a problem. This
   is often simply the result of contact issues with the MicroSD card, so
   try again from the beginning if you get such an error.
7. After a few minutes, the red LED will switch back on. This indicates
   that the bootstrap update has completed successfully. Your iEvolution
   is now ready to use.

Required ROM files
------------------

For this version of the iEVO Bootstrap, the following two ROM files are required:

1) MechAssault - Phantom War (U)
2) My Healthy Cooking Coach (DSi Enhanced) (US)

Please note that the exact filename of your copy may differ from that above; this
is generally not a problem.
